1-to-2 4K HDMI® Distribution Amplifier
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
For a substitute, refer to HD-DA2-4KZ-E.
Splits one 4K HDMI® source to two separate outputs.
The Crestron® HD-DA2-4K-E is a simple to use, high-performance distribution amplifier designed to split a single HDMI® signal to feed two separate displays, switchers, AV receivers, and other devices. It handles Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP, 3D, Deep Color, and high-bitrate 7.1 audio. No programming or control system is required for operation.
For larger applications, please see the four-output HD-DA4-4K-E and the eight-output HD-DA8-4K-E.
Key Features
- Splits one HDMI® source to two outputs
- Handles video resolutions up to 4K and Ultra HD
- Handles 3D video and Deep Color
- Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio
- HDCP compliant
- Includes input and output sync indicators
- No programming or control system required
- Thin profile – less than one inch deep
- Surface, shelf, or single rack rail mountable
| Video |
| |
Input Signal Types |
HDMI® w/Deep Color, 3D, & 4K (DVI & Dual-Mode DisplayPort compatible [1]) |
| |
Output Signal Types |
HDMI w/Deep Color, 3D, & 4K (DVI compatible [1]) |
| |
Maximum Resolutions |
| |
| Scan Type |
Resolution |
Frame
Rate |
Color
Sampling |
Color
Depth |
| Progressive |
4096x2160 4K DCI
or
3840x2160 Ultra HD |
24 Hz |
4:4:4 |
30 bit |
| 30 Hz |
4:4:4 |
24 bit |
| 30 Hz |
4:2:2 |
36 bit |
| 60 Hz |
4:2:0 |
24 bit |
| 2560x1600 WQXGA |
60 Hz |
4:4:4 |
36 bit |
| 1920x1080 HD 1080p |
60 Hz |
4:4:4 |
36 bit |
| Interlaced |
1920x1080 HD 1080i |
30 Hz |
4:4:4 |
36 bit |
|
| |
NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz |
| Audio |
| |
Input Signal Types |
HDMI (Dual-Mode DisplayPort compatible [1]) |
| |
Output Signal Type |
HDMI |
| |
Formats |
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels |
| Communications |
| |
HDMI |
HDCP & EDID (does not pass CEC) |
| |
EDID |
Mode selectable for COPY 1ST or DEFAULT:
• COPY IST copies the EDID from the device connected to OUTPUT 1 and sends it to the source connected to the INPUT [2]
• DEFAULT = 720x480@60Hz, 1280x720@60Hz, 1920x1080@30Hz, 1920x1080@60Hz (preferred), and 2-channel linear PCM audio) |
| Connectors |
| |
INPUT |
(1) 19-pin Type A HDMI female;
HDMI digital video/audio input;
Also supports DVI and Dual-Mode DisplayPort [1] |
| |
OUTPUT 1 – 2 |
(2) 19-pin Type A HDMI female;
HDMI digital video/audio outputs;
Also supports DVI [1] |
| |
SERVICE |
(1) USB Type Mini-B jack;
For factory use only |
| |
24VDC 0.75A |
(1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input;
PW-2407WU power pack included |
| Controls & Indicators |
| |
PWR |
(1) Green LED, indicates operating power supplied via power pack |
| |
INPUT |
(1) Green LED, indicates a video signal at the HDMI input |
| |
OUTPUT 1 – 2 |
(2) Green LEDs, indicate video signals at each corresponding HDMI output |
| |
EDID |
(1) 2-position slide switch, selects EDID mode |
| Power Requirements |
| |
Power Pack |
0.75 Amps @ 24 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included |
| |
Power Consumption |
4 Watts typical |
| Environmental |
| |
Temperature |
32° to 104° F (0° to 40° C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| |
Heat Dissipation |
13.6 BTU/hr |
| Enclosure |
| |
Chassis |
Metal, black finish, with (2) integral mounting flanges |
| |
Mounting |
Freestanding, surface mount, or attach to a single rack rail |
| Dimensions |
| |
Height |
4.06 in (104 mm) |
| |
Width |
5.68 in (145 mm) |
| |
Depth |
0.87 in (23 mm) |
| Weight |
| |
0.78 lb (0.35 kg) |
Click
here to search product certificates.
In the box
6503160
Included Quantity : 1
Wall Mount Power Pack, 24 VDC, 0.75 A, 2.1 mm, Universal
