DM® Essentials 4K60 4:4:4 Transmitter for USB-C® DisplayPort™ Signal Extension over CATx Cable, Wall Plate, Black
Interoperability with a DM® Essentials receiver or DMPS Essentials switcher to provide point-to-point extension of a USB-C® DisplayPort™ signal over a CATx cable. Supports 4K60 4:4:4 video, HDR10+, and HDCP 2.3. Mounts into a 1-gang electrical box.
Faceplate sold separately.
The HD-TX-4KZ-111-1G is a DM Lite® 4K60 4:4:4 wall plate transmitter designed to interoperate with a DM Lite® receiver or DMPS Lite™ switcher. The HD‑TX‑4KZ‑111-1G includes a USB-C® input with DisplayPort™ Alt Mode capability, enabling the transmission of a DisplayPort AV signal. A CAT5e or higher twisted pair cable is used to connect the HD-TX-4KZ-111-1G to the DM Lite receiver or DMPS Lite switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.1
The HD-TX-4KZ-111-1G is available in two models: HD-TX-4KZ-111-1G-B (black) and HD-TX-4KZ-111-1G-W (white).
Interoperability with a DM Lite Receiver or DMPS Lite Switcher
The DM Lite output port of the HD-TX-4KZ-111-1G must be connected to a DM Lite input port of a DM Lite receiver or DMPS Lite switcher. Examples of supported DM Lite 4K60 4:4:4 receivers are the HD‑RX‑4KZ‑101, HD‑RXA‑4KZ‑101, HD‑RXC‑4KZ‑101, and HD‑RXCA‑4KZ‑101. Supported DMPS Lite switchers are the HD‑PS621, HD‑PS622, HD‑PS401, HD‑PS402, and HD‑RX‑4K‑210‑C‑E(‑POE).
Note: When paired with an HD-RX-4K-210-C-E(-POE), the transmitter cannot provide power to the receiver. Power must be connected to the HD-RX-4K-210-C-E(-POE) only.
The HD-TX-4KZ-111-1G can be configured and controlled only when it is used with a DMPS Lite switcher. The web interface of the switcher can be used to configure the HD-TX-4KZ-111-1G. In addition, control system programming and .AV Framework™ software support of the HD-TX-4KZ-111-1G is hosted by the switcher.
4K60 4:4:4 and HDR Support
The HD-TX-4KZ-111-1G supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2
One-Gang Wall Plate Design
The HD‑TX‑4KZ‑111‑1G is designed to mount into a 1-gang U.S. electrical box or plaster ring (not included). The HD-TX-4KZ-111-1G can receive power from the remote DM Lite receiver (surface mountable only) or DMPS Lite switcher.3
Key Features
- Interoperability with a DM Lite® receiver or DMPS Lite™ switcher
- USB-C® input with DisplayPort™ Alt Mode capability for the point-to-point extension of a DisplayPort AV signal over a CAT5e or higher cable
- DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
- 4K60 4:4:4 capability
- HDR10, HDR10+, and Dolby Vision® video formats
- Compliance with HDCP 2.3
- CEC (Consumer Electronics Control) pass-through capability
- EDID pass-through capability
- One-gang wall plate design with black finish
- Decorator style faceplate required (FP-G Series sold separately)
- Power from the remote DM Lite receiver (surface mountable only) or DMPS Lite switcher
| Video |
| Input Signal Type |
DisplayPort™ over USB-C® (DisplayPort Alt Mode) with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support2 |
| Output Signal Type |
DM Lite® with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support2 |
| Copy Protection |
HDCP 2.3 |
| Resolutions |
Common resolutions are listed in the following table. |
| Progressive |
4096x2160 DCI 4K & 3840x2160 4K UHD |
24 Hz |
4:4:4 |
12 bit |
| 30 Hz |
4:4:4 |
12 bit |
| 60 Hz |
4:2:2 |
12 bit |
| 60 Hz |
4:4:4 |
8 bit |
| 2560x1600 WQXGA |
60 Hz |
4:4:4 |
8 bit |
| 1920x1080 FHD 1080p |
60 Hz |
4:4:4 |
12 bit |
|
Note: The maximum supported resolution is 4K60 with 4:4:4 color sampling. Custom resolutions are supported at pixel clock rates up to 600 MHz.
The HD-TX-4KZ-111-1G does not support interlaced video.
|
|
| Audio |
| Input Signal Type |
DisplayPort over USB-C (DisplayPort Alt Mode) |
| Output Signal Type |
DM Lite |
| Digital Formats |
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels |
| Communications |
| USB-C |
HDCP 2.3, EDID, CEC pass-through |
| DM Lite |
HDCP 2.3, EDID pass-through |
| Connectors |
| USB IN |
(1) USB Type‑C® connector, female;
Digital video/audio input using DisplayPort Alt Mode4 |
| DM LITE OUT |
(1) 8‑pin RJ‑45 yellow connector, female, shielded;
DM Lite output port for connection to a DM Lite receiver or DMPS Lite™ switcher1, 5 |
| 24V 0.75A |
(1) 2-pin 3.5 mm detachable terminal block;
24VDC power input;
Power pack sold separately, required only if the HD-TX-4KZ-111-1G is used with a wall plate receiver3 |
| Ground |
(1) Chassis ground lug |
| Controls and Indicators |
| LINK |
(1) Green LED, indicates that a DM Lite link is established. |
|
PWR
|
(1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational. |
| USB IN |
(1) Green LED, indicates that the device is receiving a DisplayPort over USB‑C (DisplayPort Alt Mode) input signal |
| DM LITE OUT |
(2) LEDs on RJ‑45 connector.
Green indicates that a DM Lite link is established.
Flashing amber indicates non‑HDCP video, and solid amber indicates HDCP video. |
| Power |
| Power Pack |
Input: 100-240VAC
Output: 24VDC 0.75A
Model: PW-2407WUL (sold separately, required only if the HD-TX-4KZ-111-1G is used with a wall plate receiver)3 |
| Environmental |
| Temperature |
32° to 104°F (0° to 40°C) |
| Humidity |
20% to 90% RH (non-condensing) |
| Construction |
| Composition |
Metal housing and bracket with black polycarbonate front label overlay |
| Mounting |
Mounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included) |
| Faceplate |
Requires a decorator style faceplate
(FP-G series, sold separately) |
| Dimensions |
| Height |
4.12 in. (105 mm) |
| Width |
1.72 in. (44 mm) |
| Depth |
2.19 in. (56 mm) |
| Weight |
| 5.33 oz (152 g) |
| Compliance |
|
Regulatory Model: M202045001
Intertek® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device
|
| Maximum DM Lite Transmission Distance |
| Resolution |
Frame Rate (Hz) |
Color Sampling |
Color Depth |
Cable Type1 |
| 1920x1080 FHD 1080p |
60 |
4:4:4 |
8, 12 bit |
230 ft (70 m) |
195 ft (60 m) |
| 1600x1200 UXGA |
60 |
4:4:4 |
8, 12 bit |
| 2048x1080 DCI 2K |
60 |
4:4:4 |
8, 12 bit |
| 1920x1200 WUXGA |
60 |
4:4:4 |
8, 12 bit |
| 2048x1152 QWXGA |
60 |
4:4:4 |
8, 12 bit |
| 2560x1080 UWFHD |
60 |
4:4:4 |
8 bit |
| 2560x1440 WQHD Reduced Blanking |
60 |
4:4:4 |
8 bit |
| 2560x1600 WQXGA Reduced Blanking |
60 |
4:4:4 |
8 bit |
| 2048x1152 QWXGA |
60 |
4:4:4 |
12 bit |
| 3840x2160 4K UHD and 4096x2160 DCI 4K |
30 |
4:2:2 |
12 bit |
| 30 |
4:4:4 |
8 bit |
| 60 |
4:2:0 |
8 bit |
| 3840x2160 4K UHD and 4096x2160 DCI 4K |
30 |
4:4:4 |
12 bit |
130 ft (40 m) |
100 ft (30 m) |
| 60 |
4:2:0 |
12 bit |
| 60 |
4:2:2 |
12 bit |
| 60 |
4:4:4 |
8 bit |
|
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.