Master Photo: HD-TX-301-C-E
Add to Favorites

HD-TX-301-C-E

DM Lite® Transmitter and 3x1 Auto-Switcher for HDMI®, VGA, and Analog Audio Signal Extension over CATx Cable

Pairs with a DM Lite® or DMPS Lite™ receiver to provide a signal extender for HDMI® signals up to UHD and 4K. Provides auto-switching HDMI (x2), VGA, and stereo analog audio inputs.

Limited Supply Available

Have a question?
Add to a Project
Find a Dealer

The HD-TX-301-C-E is a DM Lite® surface-mountable transmitter designed to pair with a DM Lite or DMPS Lite™ receiver to form a signal extender for HDMI® signals. The DM Lite family of products offers a versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or higher) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K.1

The HD-TX-301-C-E includes two HDMI inputs and one VGA input. The VGA input is accompanied by a stereo analog audio input. Auto-switching between the HDMI and VGA inputs enables plug-and-play simplicity. Manual input selection is also available via individual buttons on the unit. The VGA input can accept RGB and component video signals by using an appropriate breakout cable or adapter (not included). The audio input is selected in tandem with the VGA input, and can be used by itself with no video source connected. However, it cannot be paired with the HDMI video input.

NOTE: When paired with an HD-RX-201-C-E or DMPS Lite receiver, input selection can be controlled remotely through integration with a Crestron® control system.

The HD-TX-301-C-E is designed to mount on a flat surface beneath a table, behind a credenza, or inside a podium. It can also be attached to a single rack rail in the back of an equipment cabinet. When powered using the provided wall mount power pack, the HD-TX-301-C-E also supplies power to the connected receiver over the link cable. Alternately, a power pack may be connected to the receiver, which in turn supplies power to the HD-TX-301-C-E over the link cable.2

For a complete tabletop interface solution with easy pull-out cables and simple one-touch control, a single TT-100 series Crestron Connect It™ Cable Caddy may be installed in the table and connected to the HD-TX-301-C-E mounted below.

NOTE: This product is not addressable from a control system and offers no programmable functionality except when paired with an HD-RX-201-C-E or DMPS Lite receiver. Otherwise, AV and CEC signals are simply passed through between the transmitter and receiver. The RJ-45 link port on this product is exclusively intended for linking with a single DM Lite or DMPS Lite receiver. It should not be used to connect to any other equipment or network. DM Lite technology is not compatible with PoE, PoDM, DigitalMedia 8G+®, or HDBaseT® technology.

 
Key Features
  • Pairs with a DM Lite® or DMPS Lite™ receiver
  • Enables extension of HDMI® video and audio signals
  • Converts and extends VGA and analog audio signals
  • Auto-switches between two HDMI inputs and one VGA input
  • Works with the optional TT-100 series Crestron Connect It™ Cable Caddy
  • Links to the receiver via a single CAT5e (or higher) twisted pair cable
  • Supports 4K and UHD at up to 130 ft (40 m)
  • Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m)
  • Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
  • Handles 3D video and Deep Color
  • Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
  • Compatible with HDMI, DVI, and Dual-Mode DisplayPort™ sources
  • Compatible with VGA, RGBHV, RGBS, RGsB, and YPbPr component sources up to HD 1080p and WUXGA
  • HDCP 1.4 compliant
  • Passes CEC and EDID signals
  • Allows control system integration when paired with an HD-RX-201-C-E or DMPS Lite receiver
  • Low-profile surface mount design
  • Universal 100-240V power pack included
  1. For the DM Lite link cable, use Crestron DM-CBL-8G DigitalMedia 8G™ cable, Crestron DM-CBL-ULTRA DigitalMedia™ Ultra cable, or third-party CAT5e or higher. The maximum cable length is 230 ft (70 m) for resolutions up to 2K or 130 ft (40 m) for higher resolution signals up to 4K. Refer to the “Maximum DM Lite Link Cable Lengths” table for a more detailed overview. Shielded cable and connectors are required when bundling multiple cables in a wire run, and are recommended for all applications to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Wire and cables are sold separately. DM Lite devices are not compatible with DigitalMedia 8G+, HDBaseT, PoE, PoDM, or any other CATx based interface or network.
  2. The power pack may be connected to either the transmitter or receiver. Only one power pack is required. Do not connect more than one power pack. DM Lite devices are not compatible with PoE or PoDM.
  3. The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
  4. The VGA input requires an appropriate breakout cable or adapter to accommodate an RGB or component video signal.

This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.

This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

The specific patents that cover Crestron products are listed online at patents.crestron.com.

Certain Crestron products contain open source software. For specific information, visit https://www.crestron.com/opensource.

Crestron, the Crestron logo, Crestron Connect It, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G, DM Lite, and DMPS Lite are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries.  DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDBaseT is either a trademark or registered trademark of HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2020 Crestron Electronics, Inc.

 
4K AVF Works With (2)

You May Also Be Interested In

마스터 사진: HD-RX-4K-510-C-E

HD-RX-4K-510-C-E

DMPS Lite™ 4K Multiformat 5x1 AV Switch and Receiver
Powered by Translations.com GlobalLink Web SoftwarePowered by GlobalLink Web
mgctlbxN$MZP mgctlbxV$5.2.4 mgctlbxL$C