HD-RXC-4KZ-101-1G-B [Crestron Electronics, Inc.]

Products / Video / DM Essentials / Transmitters/Receivers / HD-RXC-4KZ-101-1G-B

Master Photo: HD-RXC-4KZ-101-1G-B, Front with Faceplate

HD-RXC-4KZ-101-1G-B

DM® Essentials 4K60 4:4:4 Receiver for HDMI®, RS-232, and IR Signal Extension over CATx Cable, Wall Plate, Black

Interoperability with a DM® Essentials transmitter or DMPS Essentials switcher to provide point-to-point extension of HDMI®, RS-232, and IR signals over a CATx cable. Supports 4K60 4:4:4 video, HDR10+, and HDCP 2.3. Mounts into a 1-gang electrical box.

Faceplate sold separately.

Have a question?

Add to a Project

Resources

+ Specifications

+ Downloads & documentation

Find a Dealer

The HD‑RXC‑4KZ‑101‑1G is a DM® Essentials 4K60 4:4:4 wall plate receiver designed to interoperate with a DM® Essentials transmitter or DMPS Essentials switcher for the transmission of HDMI®, RS-232, and IR signals. A CAT5e or higher twisted pair cable (Crestron DM‑CBL‑8G or DM‑CBL‑ULTRA sold separately) is needed to connect the HD‑RXC‑4KZ‑101‑1G to the DM Essentials transmitter or DMPS Essentials switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.¹

The HD‑RXC‑4KZ‑101‑1G is available in black (model HD‑RXC‑4KZ‑101‑1G-B).

Interoperability with a DM Essentials Transmitter or DMPS Essentials Switcher
The DM Essentials input port of the HD‑RXC‑4KZ‑101‑1G must be connected to a DM Essentials output port of a DM Essentials transmitter or DMPS Essentials switcher. Examples of supported DM Essentials 4K60 4:4:4 transmitters are the HD‑TXC‑4KZ‑101 and HD‑TXCA‑4KZ‑101. Supported DMPS Essentials switchers are the HD‑PS622, HD‑PS621, HD‑PS402, and HD‑PS401.

The HD‑RXC‑4KZ‑101‑1G can be configured and controlled only when it is used with a DMPS Essentials switcher. The web interface of the switcher can be used to configure the HD‑RXC‑4KZ‑101‑1G. In addition, control system programming and .AV Framework™ software support of the HD‑RXC‑4KZ‑101‑1G is hosted by the switcher.

4K60 4:4:4 and HDR Support
The HD-RXC-4KZ-101-1G supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.²

One-Gang Wall Plate Design
The HD‑RXC‑4KZ‑101‑1G is designed to mount into a 1-gang U.S. electrical box or plaster ring (not included). The HD‑RXC‑4KZ‑101‑1G can receive power from the remote DM Essentials transmitter (surface mountable only) or DMPS Essentials switcher.³

Key Features

Interoperability with a DM® Essentials transmitter or DMPS Essentials switcher
Point-to-point extension of HDMI®, RS-232, and IR signals over a CAT5e or higher cable
DM Essentials transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
4K60 4:4:4 capability
HDR10, HDR10+, and Dolby Vision® video formats
Compliance with HDCP 2.3
CEC (Consumer Electronics Control) pass-through capability
Bidirectional RS-232 and IR pass-through capability
EDID pass-through capability
One-gang wall plate design with black finish
Decorator style faceplate required (FP-G Series sold separately)
Power from the remote DM Essentials transmitter (surface mountable only) or DMPS Essentials switcher

For DM Essentials connections, use Crestron DM‑CBL‑8G, Crestron DM‑CBL‑ULTRA, or third‑party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Cables are sold separately.
4K60 4:4:4 performance and HDR support require the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Bandwidth loss is cumulative; therefore, performance may be reduced when inserting multiple cables and couplers inline.
When a DM Essentials wall plate receiver is paired with a DM Essentials surface‑mountable transmitter, the power pack included with the transmitter is used to power both devices.

When a DM Essentials receiver is paired with a DMPS Essentials switcher, the switcher provides power to the DM Essentials receiver.

If a DM Essentials wall plate receiver is paired with a DM Essentials wall plate transmitter, the devices must be powered independently by a PW‑2407WUL power pack (sold separately) for each device. A wall plate receiver and wall plate transmitter cannot provide power to the remote device with which it is paired.
The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are sold separately.

This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or contact us for additional information by visiting www.crestron.com/contact/our-locations for your local contact.

This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

The specific patents that cover Crestron products are listed online at patents.crestron.com.

Certain Crestron products contain open-source software. For specific information, please visit www.crestron.com/opensource.

Crestron, the Crestron logo, .AV Framework, and DM are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, Dolby Digital, and Dolby Vision are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Intertek and the Intertek logo are either trademarks or registered trademarks of Intertek Group in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2024 Crestron Electronics, Inc.

Video

Input Signal Type

DM® Essentials with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support²

Output Signal Type

HDMI® with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support² (DVI compatible⁴)

Copy Protection

HDCP 2.3

Resolutions

Common resolutions are listed in the following table.

Scan Type	Resolution	Frame Rate	Color Sampling	Color Depth
Progressive	4096x2160 DCI 4K & 3840x2160 4K UHD	24 Hz	4:4:4	12 bit
		30 Hz	4:4:4	12 bit
		60 Hz	4:2:2	12 bit
		60 Hz	4:4:4	8 bit
	2560x1600 WQXGA	60 Hz	4:4:4	8 bit
	1920x1080 FHD 1080p	60 Hz	4:4:4	12 bit
Interlaced	1920x1080 HD 1080i	30 Hz	4:4:4	12 bit
Note: The maximum supported resolution is 4K60 with 4:4:4 color sampling. Custom resolutions are supported at pixel clock rates up to 600 MHz.

Audio

Input Signal Type

DM Essentials

Output Signal Type

HDMI

Digital Formats

Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels

Communications

HDMI

HDCP 2.3, EDID, CEC pass-through

DM Essentials

HDCP 2.3, EDID pass-through

RS-232

2-way serial pass-through up to 115.2k baud (TD/RD only)

Bidirectional IR signal pass-through up to 60 kHz

Connectors

IR IN/OUT

(1) 4-pin 3.5 mm detachable terminal block;
Comprised of (1) IR input port and (1) IR output port;
IR IN is for connection from a Crestron IR control port or other IR signal source and passes the IR input signal to the IR OUT port on the DM Essentials transmitter;
IR OUT is for connection to an IR emitter (IRP2, sold separately) and transmits the IR signal from the IR IN port on the DM Essentials transmitter;
Supports IR up to 60 kHz

COM

(1) 3-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Passes RS-232 TD/RD data to/from the COM port on a DM Essentials transmitter;
Supports up to 115.2k baud

HDMI OUT

(1) HDMI Type A connector, female;
HDMI digital video/audio output;
DVI compatible⁴

DM IN

(1) 8‑pin RJ‑45 yellow connector, female, shielded;
DM Lite input port for connection to a DM Essentials output port of a DM Essentials transmitter or DMPS Essentials switcher¹

24V 0.75A

(1) 2-pin 3.5 mm detachable terminal block;
24VDC power input;
Power pack sold separately, required only if the HD-RXC-4KZ-101-1G is used with a wall plate transmitter³

Ground

(1) Chassis ground lug

Controls and Indicators

LINK

(1) Green LED, indicates that a DM Essentials link is established.

PWR

(1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.

HDMI OUT

(1) Green LED, indicates that the device is transmitting an HDMI signal

DM IN

(2) LEDs on RJ‑45 connector.
Green indicates that a DM Essentials link is established.
Flashing amber indicates non‑HDCP video, and solid amber indicates HDCP video.

Power

Power Pack

Input: 100-240VAC
Output: 24VDC 0.75A
Model: PW-2407WUL (sold separately, required only if the HD-RXC-4KZ-101-1G is used with a wall plate transmitter)³

Environmental

Temperature

32° to 104°F (0° to 40°C)

Humidity

20% to 90% RH (non-condensing)

Construction

Composition

Metal housing and bracket with black polycarbonate front label overlay

Mounting

Mounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included)

Faceplate

Requires a decorator style faceplate
(FP-G series, sold separately)

Dimensions

Height

4.12 in. (105 mm)

Width

1.72 in. (44 mm)

Depth

2.19 in. (56 mm)

Weight

5.4 oz (153 g)

Compliance

Regulatory Model: M202045001
Intertek® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device

Maximum DM Essentials Transmission Distance

Resolution	Frame Rate (Hz)	Color Sampling	Color Depth	DM-CBL-ULTRA DM® Ultra Cable	DM-CBL-8G DM 8G® Cable or CAT5e (UTP) or Higher
Resolution	Frame Rate (Hz)	Color Sampling	Color Depth	Cable Type¹
1920x1080 HD 1080i	30	4:4:4	12 bit	230 ft (70 m)	195 ft (60 m)
1920x1080 FHD 1080p	60	4:4:4	8, 12 bit
1600x1200 UXGA	60	4:4:4	8, 12 bit
2048x1080 DCI 2K	60	4:4:4	8, 12 bit
1920x1200 WUXGA	60	4:4:4	8, 12 bit
2048x1152 QWXGA	60	4:4:4	8, 12 bit
2560x1080 UWFHD	60	4:4:4	8 bit
2560x1440 WQHD Reduced Blanking	60	4:4:4	8 bit
2560x1600 WQXGA Reduced Blanking	60	4:4:4	8 bit
2048x1152 QWXGA	60	4:4:4	12 bit
3840x2160 4K UHD and 4096x2160 DCI 4K	30	4:2:2	12 bit
	30	4:4:4	8 bit
	60	4:2:0	8 bit
3840x2160 4K UHD and 4096x2160 DCI 4K	30	4:4:4	12 bit	130 ft (40 m)	100 ft (30 m)
	60	4:2:0	12 bit
	60	4:2:2	12 bit
	60	4:4:4	8 bit

Click here to search product certificates.

For DM Essentials connections, use Crestron DM‑CBL‑8G, Crestron DM‑CBL‑ULTRA, or third‑party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Cables are sold separately.
4K60 4:4:4 performance and HDR support require the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Bandwidth loss is cumulative; therefore, performance may be reduced when inserting multiple cables and couplers inline.
When a DM Essentials wall plate receiver is paired with a DM Essentials surface‑mountable transmitter, the power pack included with the transmitter is used to power both devices.

When a DM Essentials receiver is paired with a DMPS Essentials switcher, the switcher provides power to the DM Essentials receiver.

If a DM Essentials wall plate receiver is paired with a DM Essentials wall plate transmitter, the devices must be powered independently by a PW‑2407WUL power pack (sold separately) for each device. A wall plate receiver and wall plate transmitter cannot provide power to the remote device with which it is paired.
The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are sold separately.