HD-TX-4KZ-421-CHGR

DM® Essentials 4K60 4:4:4 Transmitter and 4x1 Auto-Switcher for HDMI® and USB-C® DisplayPort™ Signal Extension over CATx Cable

Interoperability with a DM® Essentials receiver or DMPS Essentials switcher to provide point-to-point extension of an HDMI® or USB-C® DisplayPort™ signal over a CATx cable. Supports 4K60 4:4:4 video, HDR10+, and HDCP 2.3. Provides two HDMI inputs and two USB-C DisplayPort inputs with automatic switching capability. Charging capability provided by the USB-C DisplayPort inputs.

The HD-TX-4KZ-421-CHGR is a DM® Essentials 4K60 4:4:4  transmitter designed to interoperate with a DM® Essentials receiver or DMPS Essentials switcher. The HDMI® inputs of the HD-TX-4KZ-421-CHGR enable the transmission of an HDMI signal. The USB-C® inputs with DisplayPort™ Alt Mode capability enable the transmission of a DisplayPort AV signal. A CAT5e or higher twisted pair cable (Crestron DM CBL 8G or DM CBL ULTRA sold separately) is needed to connect the HD-TX-4KZ-421-CHGR to the DM Essentials receiver or DMPS Essentials switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.1

Interoperability with a DM Essentials Receiver or DMPS Essentials Switcher
The DM Essentials output port of the HD-TX-4KZ-421-CHGR must be connected to a DM Essentials input port of a DM Essentials receiver or DMPS Essentials switcher. Examples of supported DM Essentials 4K60 4:4:4 receivers are the HD‑RXC‑4KZ‑101 and HD‑RXCA‑4KZ‑101. Supported DMPS Essentials switchers are the HD‑PS622, HD‑PS621, HD‑PS402, HD‑PS401, and HD‑RX‑4K‑210‑C‑E.

The HD-TX-4KZ-421-CHGR can be configured and controlled only when it is used with a DMPS Essentials switcher. The web interface of the switcher can be used to configure the HD-TX-4KZ-421-CHGR. In addition, control system programming and .AV Framework™ software support of the HD-TX-4KZ-421-CHGR is hosted by the switcher.

4K60 4:4:4 and HDR Support
The HD-TX-4KZ-421-CHGR supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2

Automatic Switching of Inputs
When the HD-TX-4KZ-421-CHGR is used with a DMPS Essentials switcher, the web interface of the switcher or control system programming hosted by the switcher can be used to configure AV switching behavior. Switching among the HDMI and USB-C DisplayPort inputs occurs based on the last connected input or on the routing priority assigned to each input. In addition, input selection push buttons on the front panel of the HD-TX-4KZ-421-CHGR enable the desired input to be selected manually.

USB-C DisplayPort Inputs with Charging Capability
When the HD-TX-4KZ-421-CHGR is powered by the included power pack, each USB-C DisplayPort input can charge the connected AV source (for example, a laptop) with up to 60W of power. If the HD-TX-4KZ-421-CHGR is powered by a remote DM Essentials receiver or DMPS Essentials switcher, no charging capability is provided by the USB-C inputs.

Compact, Surface‑Mountable Design
Compact in design, the HD-TX-4KZ-421-CHGR can be mounted onto a flat surface such as the underside of a table, behind a credenza, or inside a podium. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD-TX-4KZ-421-CHGR can receive power from the included power pack or from the remote DM Essentials receiver or DMPS Essentials switcher.3

 
Key Features
  • Interoperability with a DM® Essentials receiver or DMPS Essentials switcher
  • Point-to-point extension of an HDMI® or USB-C® DisplayPort™ signal over a CAT5e or higher cable
  • USB-C inputs with DisplayPort Alt Mode capability
  • DM Essentials transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
  • 4K60 4:4:4 capability
  • HDR10, HDR10+, and Dolby Vision® video formats
  • Compliance with HDCP 2.3
  • Automatic switching of HDMI and USB-C DisplayPort inputs
  • Charging capability provided by the USB-C DisplayPort inputs
  • CEC (Consumer Electronics Control) pass-through capability
  • EDID pass-through capability
  • Compact, surface-mountable design
  • Power from 24VDC power pack (included) or from remote DM Essentials receiver or DMPS Essentials switcher
  1. For DM Essentials connections, use Crestron DM‑CBL‑8G, Crestron DM‑CBL‑ULTRA, or third‑party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Cables are sold separately.
  2. For HDMI inputs, 4K60 4:4:4 performance and HDR support require the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Bandwidth loss is cumulative; therefore, performance may be reduced when inserting multiple cables and couplers inline.

    For USB-C DisplayPort inputs, 4K60 4:4:4 performance and HDR support require the use of USB 3.2 Gen 1 (5 Gbps) cables with support for DisplayPort Alt Mode (DisplayPort 1.4 video, 4K60 4:4:4, 2 lanes). Cables are sold separately.
  3. When a surface-mountable DM Essentials transmitter is paired with a surface-mountable DM Essentials receiver, either the power pack included with the transmitter or the receiver can be used to power both devices. A power pack must not be connected to both devices simultaneously.

    When a surface-mountable DM Essentials transmitter is paired with a wall plate DM Essentials receiver, the power pack included with the transmitter is used to power both devices.

    When a DM Essentials transmitter is paired with a DMPS Essentials switcher, the switcher provides power to the DM Essentials transmitter. The DM Essentials transmitter must be connected to the included power pack only when charging capability is to be provided by a USB-C input.
  4. The HDMI input requires an appropriate adapter or interface cable to accommodate a Dual‑Mode DisplayPort or DVI signal. CBL‑HD‑DVI interface cables are sold separately.
  5. In order for a USB-C DisplayPort input to charge the connected AV source, the HD‑TX‑4KZ‑421-CHGR must be powered by the included power pack. If the HD-TX-4KZ-421-CHGR is powered by a remote DM Essentials receiver or DMPS Essentials switcher, no charging capability is provided by a USB-C input.

    CBL‑USB3G1‑C‑C‑6 and CBL‑USB3G2‑C‑C‑3 cables are sold separately.

This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or contact us for additional information by visiting www.crestron.com/contact/our-locations for your local contact.

This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

The specific patents that cover Crestron products are listed online at patents.crestron.com.

Certain Crestron products contain open-source software. For specific information, please visit www.crestron.com/opensource.

Crestron, the Crestron logo, .AV Framework, and DM are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, Dolby Digital, and Dolby Vision are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Intertek and the Intertek logo are either trademarks or registered trademarks of Intertek Group in the United States and/or other countries. USB Type-C and USB‑C are either trademarks or registered trademarks of USB Implementers Forum, Inc. in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2023 Crestron Electronics, Inc.

 
4K HDMI AVF Works With (2) HDCP 2.3
Powered by Translations.com GlobalLink Web SoftwarePowered by GlobalLink Web
mgctlbxN$MZP mgctlbxV$5.2.4 mgctlbxL$C