FT2A-UTK-PWS [Crestron Electronics, Inc.]

FT2A-UTK-PWS

Power Supply for FT2 ELEC Series

Designed for use with a Crestron FT2 ELEC series FlipTop™. One is included with each FlipTop, and a second may be purchased as required to support installations using two USB Rapid Charging Modules.

Configure your FlipTop now!
Launch Configurator

Have a question?

Add to a Project

Resources

+ Specifications

+ Downloads & documentation

Find a Dealer

The FT2A-UTK-PWS is a power supply designed for use with a Crestron FT2 ELEC series FlipTop™. A single power supply is included with each FlipTop. A second power supply may be purchased separately when required to support more than one (but not more than two) USB Rapid Charging Modules (model FT2A-CHGR-USBA/C). Each FT2A-UTK-PWS includes a mounting bracket, which allows attachment of the power supply to the FlipTop chassis beneath the table. A maximum of two power supplies may be connected to a single FlipTop.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at https://www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.

The specific patents that cover this and other Crestron products are listed online at https://www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, visit https://www.crestron.com/opensource.

Crestron, the Crestron logo, and FlipTop are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2018 Crestron Electronics, Inc.

Output Rating
24 Volts DC, 2.5 Amps, regulated
Power Requirements
1.3 Amps (maximum) @ 100-240 Volts AC, 50/60 Hz
Connections
Line	(1) IEC 60320 C7 main power inlet; Mates with removable power cord, included
Load	(1) 6 ft (1.83 m) attached cable with 2.1 x 5.5 mm DC power barrel connector; Center pin +
Environmental
Temperature	32° to 113° F (0° to 45° C)
Humidity	10% to 90% RH (non-condensing)
For indoor use only
Construction
Composition	Plastic, black, includes mounting bracket
Mounting	• Attaches beneath the table to mounting slots on the front, left, or right side of the FlipTop chassis; • Requires approximately 10 inches (254 mm) minimum vertical clearance beneath the top surface of the table; • Projects 1.57 inches (40 mm) from the front or side of the FlipTop chassis beneath the table (requires an additional 0.2 inch or 5 mm for installation)
Dimensions
Height	4.91 in (125 mm)
Width	2.21 in (57 mm)
Depth	1.57 in (40 mm)
Weight
TBD
Compliance
UL Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device