Master photo:BPC-8
Add to Favorites

BPCI-8

onCue® Basic Presentation Controller, International

Discontinued

This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

An extremely simple and cost-effective presentation control solution for K-12 primary education classrooms and small meeting rooms.

Have a question?
Add to a Project
Find a Dealer

Simple, reliable control meets extreme affordability in the onCue® Basic Presentation Controller from Crestron®. Ideal for K-12 primary education classrooms and small meeting rooms, onCue provides a compact wall mount keypad controller (BPC-8) with eight assignable buttons for controlling a single projector, flat screen display, or source device. Crestron onCue can even be configured to control a complete room presentation system equipped with a display device, a motorized screen or lift, and a controllable source such as a DVD player.

Always Ready — Easy to Use
Stop searching for lost remotes and constantly replacing batteries just to turn on the projector. Mounted on the wall or in a lectern, onCue is always at the ready, affording straight-forward operation through large, easy-to-read backlit buttons. A selection of pre-labeled buttons provides for control of power, source selection, and volume control, and all eight buttons are interchangeable to suit the application, delivering a customizable control solution that is immediately intuitive to every user. With onCue, every room in your facility can be set up for identical operation, so even if the display equipment varies from room to room, the user experience remains consistent.

Super Simple Installation
The onCue BPC-8 controller mounts conveniently in a single-gang electrical box or mud ring. A single 4-conductor cable [1] links the BPC-8 to its companion interface module (BPC-8-IMC included), which may be installed anywhere up to 50 ft away. The tiny module typically installs at the display location, providing connectivity for up to three IR-controlled devices, one RS-232 controlled device, and an AC power pack.[2]

The BPC-8 ships with the interface module, power pack, one IR emitter, and a set of 13 interchangeable button caps. Just add the 4-conductor link cable [1] and you've got everything you need to control a typical projector or flat panel display. Additional IR emitters, an RS-232 cable, and an alternate set of buttons for controlling a source device, are also available separately. Custom labeled buttons may also be ordered.

Built-In Library
Configuring onCue to control a single display device is a simple two step process. Just find your display in the list provided, and enter its designated code using the BPC-8 keypad. That's it. The buttons come pre-configured out of the box, ready for controlling your display's power, volume, mute, and source select functions.

Easy Learning and More
Your onCue system can easily graduate to a higher level of control using the optional onCue software tool and BPC-HPLIR IR Learner & Programmer.[3] With full access to the vast Crestron Database of IR devices, and the ability to learn IR commands from virtually any third-party IR remote, installers can easily assign any command to any button and enable control of multiple devices. The software tool also enables the entry of serial commands to support device control via 1-way RS-232.[2]

Macro Magic
Even better, the software tool enables the creation of sophisticated macros, allowing onCue to send multiple commands to multiple devices with a single button press. Using macros, it can be possible to simultaneously select a source, turn on the projector, and lower the projection screen with one button. Or, use one button to "click" through the available sources one-by-one. A single macro can consist of up to 5 separate commands, with the ability to define a time delay or "wait for next button press" between each one.

LED Feedback
Each button on the BPC-8 keypad controller includes a red LED to provide users with extra assurance behind every button press. Out of the box, these LEDs illuminate momentarily when the associated button is pressed. Using the software tool, the LED behavior can be customized to support toggle feedback (LED latches on and off with each successive button press), and interlock grouping. Interlock feedback is ideal for use with discrete source selection buttons, and discrete on and off buttons, to indicate the last selected source or power state.

Extra Safeguards
Additional capabilities include the options to enable passcode protection and auto-shutdown. Passcode protection prevents unauthorized use of the system by requiring the entry of a preset sequence of four button presses to enable operation. Auto-shutdown turns off the display device if no button is pressed within a preset amount of time, saving energy and preventing the premature failure of expensive projector lamps.[4]

Uploads at the Speed of Light
After creating your custom configuration using the onCue software tool, simply use the handheld BPC-HPLIR IR Learner & Programmer [3] to upload the configuration file to the BPC-8. The handheld BPC-HPLIR provides a convenient means for uploading a single configuration to any number of onCue controllers, requiring mere seconds to transfer the file via a simple optical cable. There's no need to remove the BPC-8 from the wall or even remove its faceplate, and one configuration can be used repeatedly for any number of identically equipped rooms, affording incredibly quick and easy setup of each room without any need to carry around a laptop.

 
Key Features
  • Ultra-affordable control for a single display device
  • Also allows control of source components and other devices
  • Compact design mounts in a single-gang wall box
  • Affords an attractive and professional appearance
  • Features large backlit buttons for easy control in any room
  • Affords super-intuitive operation for any user
  • Includes interchangeable button caps for flexible configuration
  • Allows customizable LED button feedback behavior
  • Supports up to 3 IR and 1 RS-232 devices [2]
  • Includes built-in IR library for simple out-of-the-box setup
  • Allows advanced configuration via easy-to-use software and IR learner/programmer [3]
  • Macros enable sophisticated functionality from a single button press
  • Enables user passcode protection and automatic projector shutdown
  1. For connection between the BPC-8 Controller and BPC-8-IMC Interface Module, use a CBL-PWR-CTRL-P-TL-50 or equivalent 4-conductor cable (sold separately). Cresnet® Control Cable is an acceptable equivalent. The maximum length allowed is 50 ft (15 m). Do not connect to a Cresnet network or device, or to any other network or device.
  2. If controlling multiple devices, each device must respond to a disparate command set. Controlling IR devices in combination with an RS-232 device is not recommended.
  3. Item(s) sold separately.
  4. To take advantage of the auto-shutdown feature, it is recommended that the display device support a discrete "power off" command.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

Crestron, the Crestron logo, Cresnet, Crestron Toolbox, and onCue are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.  Acer is either a trademark or registered trademark of Acer Incorporated in the United States and/or other countries.  BenQ is either a trademark or registered trademark of BenQ Corporation in the United States and/or other countries.  Dell is either a trademark or registered trademark of Dell Inc. in the United States and/or other countries.  InFocus is either a trademark or registered trademark of InFocus Corporation in the United States and/or other countries.  Mitsubishi is either a trademark or registered trademark of Mitsubishi Electric Corporation in the United States and/or other countries.  NEC is either a trademark or registered trademark of NEC Corporation in the United States and/or other countries.  Optoma is either a trademark or registered trademark of Optoma Corporation in the United States and/or other countries.  EPSON is either a trademark or registered trademark of Seiko Epson Corporation in the United States and/or other countries.  Sony is either a trademark or registered trademark of Sony Corporation in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

 
Powered by Translations.com GlobalLink Web SoftwarePowered by GlobalLink Web
mgctlbxN$MZP mgctlbxV$5.2.4 mgctlbxL$C