DIN Rail 50 Watt Cresnet Power Supply
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
For a substitute, see DIN-PWS60.
- 50 Watt Cresnet power supply module
- Powers the DIN-AP2 Automation Processor and other Cresnet devices
- Includes 3 Cresnet power ports
The DIN-PWS50 is a 50 Watt Cresnet Power Supply module designed to snap onto a standard DIN rail for installation in a wall mount enclosure. DIN rail mounting enables modular installation alongside Crestron DIN Rail lighting and automation control modules and other third-party DIN rail mountable devices. All wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. Three (3) Cresnet power ports are provided.
Key Features
- 50 Watt Cresnet power supply module
- Powers the DIN-AP2 Automation Processor and other Cresnet devices
- Includes 3 Cresnet power ports
- Cresnet data passes through unaffected
- Dual line power input terminals for easy daisy-chaining
- 6M wide DIN rail mounting
| Output Power |
| | Per Output Port | 50 Watts (2.08 Amps @ 24 Volts DC, Regulated), limited power source |
| | Module Total | 50 Watts (2.08 Amps @ 24 Volts DC, Regulated) |
| | Ripple/Noise | <1% |
| Power Requirements |
| | Line Power | 60 Watts @ 100-240 Volts AC, 50/60 Hz |
| Connections |
| | 100-240V~50/60 Hz | (1) set of (3) captive screw terminals;
Line power input, neutral, and ground with pass-through;
Maximum Wire Size: 12 AWG (2.5 mm²) |
| | NET | (3) 4-pin 3.5mm detachable terminal blocks, paralleled;
Cresnet power output ports with data pass-through |
| | FUSE | DC output fuse, T3.15AH;
(5x20mm, 250V, 3.15A, time-lag, ceramic cartridge) |
| LED Indicators |
| | 24VDC | (1) green LED, indicates 24 Volts DC output at all NET ports; Remains lit when fuse is blown |
| Enclosure |
| | Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 6 DIN module spaces (108mm) |
| Environmental |
| | Temperature | 32° to 104°F (0° to 40°C) |
| | Humidity | 10% to 90% RH (non-condensing) |
| | Heat Dissipation | 26 BTU/hr |
| Dimensions |
| | Height | 3.71 in (9.42 cm) |
| | Width | 4.18 in (10.60 cm) |
| | Depth | 2.29 in (5.80 cm) |
| Weight |
| | 6 oz (170 g) |
Click
here to search product certificates.
